出租屋真实嫖妓

新聞動態
 介紹臺車式電阻爐使用及維修

臺車式電阻爐的使用以及維修的方法如下:
The use and maintenance methods of trolley type resistance furnace are as follows:
①操作人員一定了解電爐及其輔助設備的構造及其特性,使用前一定對減速機加入潤滑油,同時應了解電氣線路的鋪設情況。
① Operators must understand the structure and characteristics of electric furnace and its auxiliary equipment, add lubricating oil to reducer before use, and understand the laying of electrical circuit.
②在接通電源以前,一定仔細檢查設備情況是否已達到安裝、烘爐說明中的要求。
② Before switching on the power supply, be sure to carefully check whether the equipment has met the requirements of the installation and oven drying instructions.
③爐膛內纖維釘如有斷損,應及時更換,若爐襯嚴重損壞應及時重新砌筑。
③ If the fiber nails in the furnace are broken, they should be replaced in time. If the furnace lining is seriously damaged, they should be rebuilt in time.


④臺車上的爐底板嚴禁沖擊,工件應穩定放在上面,不得使其滾動和跨踏,其堆碼工件的幾何尺寸應規范在工作區尺寸內。
④ The bottom plate of the furnace on the trolley shall not be impacted. The workpieces shall be stably placed on it and shall not be rolled or stepped. The geometric dimension of the stacked workpieces shall be within the size of the working area.
臺車式電阻爐
Bogie hearth resistance furnace
⑤嚴禁將帶有腐蝕性、揮發性、爆 炸性氣體的工件放入爐內加熱,也不能向爐內直接滴入或通入可燃性液體或氣體,以免影響加熱元件及耐火材料的壽命或發生爆 炸等意外事故。
⑤ It is strictly forbidden to put the work pieces with corrosive, volatile and explosive gases into the furnace for heating, or directly drop or pass combustible liquid or gas into the furnace, so as not to affect the service life of heating elements and refractories or cause accidents such as explosion.
⑥定期揭開爐底板,每使用一段時間后吹掃底板下部氧化皮等雜物。特別在新爐底板投入使用2爐后更應立即清掃底板下部氧化皮等雜物,以防氧化鐵太多引起爐底加熱器短路或引弧。砂封槽內應經常增添和更換干河砂。
⑥ Uncover the bottom plate of the furnace regularly, and purge the oxide scale and other impurities at the bottom of the bottom plate after each period of use. Especially when the bottom plate of the new furnace is put into use, the oxide scale and other impurities under the bottom plate should be cleaned immediately to prevent too much iron oxide from causing short circuit or arcing of the bottom heater. Dry river sand should be added and replaced frequently in sand seal tank.
⑦加熱元件如經短期使用尚未發生嚴重腐蝕而折斷時,可用CHS402或CHS407高溫不銹鋼焊條,用直流電焊機進行焊 接。
⑦ If the heating element is broken after short-term use without serious corrosion, chs402 or chs407 high temperature stainless steel electrode can be used for welding with DC welding machine.
⑧爐門一經開啟時,設備自動切斷加熱電源,特殊工藝如切斷電源會影響工件質量,用戶應采取其它可靠的安 全措施,以確保操作人員的安 全,同時應經常檢查各電器間的聯鎖動作,以防失靈。
⑧ Once the furnace door is opened, the equipment will automatically cut off the heating power supply. Special process such as cutting off the power supply will affect the quality of the workpiece. Users should take other reliable safety measures to ensure the safety of operators. At the same time, they should often check the interlocking action between electrical appliances to prevent failure.
為大家講解了臺車式電阻爐的使用,在使用的時候一定要注意上面講的這些情況,要是不注意就會對爐子造成傷害的。
I explained the use of trolley type resistance furnace for you. You must pay attention to the above situations when you use it. If you don't pay attention, it will cause damage to the furnace.

 
 油罐車海底閥 鋼鋁復合暖氣片 淄博不銹鋼管廠家 燃氣回轉爐 天津紙盒
濟南金岳電爐制造有限公司 版權所有(C)2014   網絡支持   股票代碼: 002095 著作權聲明 網站管理 魯ICP備14033186號-1
出租屋真实嫖妓